Easy to set up and enjoy!
With just a few parts to set up, the Tree Seat is ready in just a few minutes!
- Tree Seat (TS) - with two seat slots on each side
- Kick Stand (KS) - integrated into bottom of TS
- Carabiner (C) - attaches to loop of TSSS
- Cam Buckle (CB) - adjusts tightness of TSSS
- Red Button Safety Strap (RBSS) -
secures TSSS to the tree - Tree Seat Support Strap (TSSS) - carabiner on one end, loop on the other
- Double Loop Connector (DLC) - secures the RBSS to the TSSS
-
Step 1
Thread the loop end of the Tree Seat Support Strap through the Tree Seat. Go up through Slot 1, down through Slot 2, across the underside of the seat and up through Slot 3, back down through Slot 4 and up and around the seat edge.
-
Step 2
Thread the Red Button Safety Strap through one end of the Double Loop Connector, and wrap around your tree at about shoulder height. Slide the red clip to the locked position after trapping it to the tree.
-
Step 3
Wrap the Tree Seat Support Strap around the tree, and through the bottom of the Double Loop Connector. Connect the Carabiner to the loop end of the Tree Seat Support Strap.
-
Step 4
Adjust the height of the seat, and use the Cam Lock to tighten and hold the seat in place. Make sure that all straps are tight, adjust the seat and have the kickstand touch the tree when the seat is tilted above horizontal - it will act as a brace with weight added to the seat. Enjoy!
